Výsledky vyhľadávania
Názov Effect of cutting conditions on quality of milled surface of medium-density fibreboards Aut.údaje Richard Kminiak, Mikuláš Siklienka ... [et al.] Autor Kminiak Richard (20%)
Spoluautori Siklienka Mikuláš (7%)
Igaz Rastislav (20%)
Krišťák Ľuboš (20%)
Gergeľ Tomáš (7%)
Němec Miroslav (7%)
Réh Roman (5%)
Očkajová Alena 1961- (7%) UMBFP07 - Katedra techniky a technológií
Kučerka Martin 1980- (7%) UMBFP07 - Katedra techniky a technológií
Zdroj.dok. BioResources. Vol. 15, no. 1 (2020), pp. 746-766. - Raleigh : North Carolina State University, 2020 Kľúč.slová frézovanie - milling strategy roughness Form.deskr. články - journal articles Jazyk dok. angličtina Krajina Spojené štáty Anotácia The quality of milled surface medium-density fibreboards (MDF) and the effect of the wrong milling direction during the process of automatic milling in real conditions in practice (production machine, production tool, and material) are presented in the paper. Moreover, the effect of the double vs. single bladed milling cutter on the final surface quality with the simultaneous changes in individual parameters of feed rate, thickness of the removed layer, and cutting direction was investigated. The MDF was separated using the strategy “one per pass“ with required cutting direction (climb or conventional) and the required thick strips cutting off (4 mm to 16+ mm) at a constant operation speed of the milling cutter (n = 20000 min−1) and a changing feed rate from vf = 1 m/min−1 to vf = 5 m/min−1. The use of a multi-bladed milling cutter resulted in the higher quality of the milled surface in all cases (change in feed rate, thickness of removed layer, and cutting direction). The effect of the wrong milling direction during automatic milling was observed only for a single-bladed milling cutter used. An increase in surface roughness (Ra) occurred; therefore, using the double-bladed milling cutter, which was not associated with an increase in surface roughness, is recommended URL Link na plný text Kategória publikačnej činnosti ADC Číslo archívnej kópie 47442 Kategória ohlasu KUDELA, Jozef. Surface properties of a medium density fibreboard evaluated from the viewpoint of its surface treatment. In Acta facultatis xylologiae Zvolen. ISSN 1336-3824, 2020, vol. 62, no. 2, pp. 35-45.
EFIMOVA, T. V. - ISCHENKO, T. L. Theoretical justification for the development of computer model of MDF structure and its milling process. In Journal of physics: conference series : 03rd international scientific conference on applied physics, information technologies and engineering (APITECH 2021), Krasnoyarsk, 24th September - 03rd October 2021 [online]. 2021, vol. 2094, art. no. 042043, pp. 1-9 [cit. 2021-12-05]. ISSN 1742-6596. Dostupné na: https://iopscience.iop.org/article/10.1088/1742-6596/2094/4/042043/pdf
MRACKOVA, Eva - SCHMIDTOVA, Jarmila - MARKOVA, Iveta - JADUDOVA, Jana - TUREKOVA, Ivana - HITKA, Milos. Fire parameters of spruce (Picea abies Karst. (L.)) dust layer from different wood technologies Slovak case study. In Applied scieneces (Basel). ISSN 2076-3417, 2022, vol. 12, no. 2, pp. 1-12.
DAHALI, Rasdianah - LEE, Seng Hua - TAHIR, Paridah Md - BAKAR, Edi Suhaimi - ROSELEY, Adlin Sabrina Muhammad - IBRAHIM, Siti Aminah - YUSOF, Norwahyuni Mohd - JAMES, Redzuan Mohammad Suffian. Influence of Chrysoporthe deuterocubensis Canker disease on the machining properties of eucalyptus urograndis. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-14.
KWIDZIŃSKI, Zdzisław - SANKIEWICZ, Łukasz - BEDNARZ, Joanna - DARŻNIK, Dariusz - KNITOWSKI, Bartłomiej - PĘDZIK, Marta - ROGOZIŃSKI, Tomasz. Wpływ prędkości posuwu podczas frezowania na jakość obróbki rowków dekoracyjnych w okładzinach skrzydeł drzwiowych wykonanych z płyt HDF. In Biuletyn informacyjny : ośrodka badawczo-rozwojowego przemysłu płyt drewnopochodnych w Czarnej wodzie. ISSN 0209-2190, 2021, no. 3-4, s. 148-156.
KWIDZINSKI, Zdzislaw - HANINCOVA, Ludka - TYMA, Eryka - BEDNARZ, Joanna - SANKIEWICZ, Lukasz - KNITOWSKI, Bartlomiej - PEDZIK, Marta - PROCHAZKA, Jiri - ROGOZINSKI, Tomasz. The efficiency of edge banding module in a mass customized line for wooden doors production. In Applied sciences (Basel). ISSN 2076-3417, 2022, vol. 12, no. 24, pp. 1-13.
SANTAMARIA-HERRERA, Alba - HOYUELOS, F. Javier - CASADO-MARCOS, Carlos. Characterization of the explosiveness of wood dust. In Process safety and environmental protection. ISSN 0957-5820, 2023, vol. 169, pp. 252-259.
DOICHINOV, Aleksandar. Optimization of the CNC milling process via modifying some parameters of the cutting mode when processing MDF workpieces. In Acta facultatis xylologiae Zvolen. ISSN 1336-3824, 2023, vol. 65, no. 2, pp. 99-107.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika 
nerozpoznaný
Názov Occupational exposure to dust produced when milling thermally modified wood Aut.údaje Alena Očkajová, Martin Kučerka ... [et al.] Autor Očkajová Alena 1961- (23%) UMBFP07 - Katedra techniky a technológií
Spoluautori Kučerka Martin 1980- (23%) UMBFP07 - Katedra techniky a technológií
Kminiak Richard (20%)
Krišťák Ľuboš (20%)
Igaz Rastislav (8%)
Réh Roman (6%)
Zdroj.dok. International Journal of Environmental Research and Public Health. Vol. 17, no. 5 (2020), pp. [1-14]. - Basel : Multidisciplinary Digital Publishing Institute, 2020 Kľúč.slová wood dust thermowood oak-wood spruce granularity Form.deskr. články - journal articles Jazyk dok. angličtina Krajina Švajčiarsko URL Link na plný text Kategória publikačnej činnosti ADC Číslo archívnej kópie 47614 Kategória ohlasu NASIR, Vahid - COOL, Julie. Characterization, optimization, and acoustic emission monitoring of airborne dust emission during wood sawing. In International journal of advanced manufacturing technology. ISSN 0268-3768, 2020, vol. 109, no. 9-12, pp. 2365-2375.
DIMOU, Vasiliki - MALESIOS, Chrisovalantis - CHATZIKOSTI, Vasiliki. Assessing chainsaw operators' exposure to wood dust during timber harvesting. In SN applied sciences. ISSN 2523-3963, 2020, vol. 2, no. 11, pp. [1-11].
TUREKOVÁ, Ivana - MARKOVÁ, Iveta. Ignition of deposited wood dust layer by selected sources. In Applied sciences - Basel. ISSN 2076-3417, 2020, vol. 10, no. 17, pp. 1-16.
CHUCHALA, Daniel - SANDAK, Jakub - ORLOWSKI, Kazimierz A. - MUZINSKI, Tomasz - LACKOWSKI, Marcin - OCHRYMIUK, Tomasz. Effect of the drying method of pine and beech wood on fracture toughness and shear yield stress. In Materials. ISSN 1996-1944, 2020, vol. 13, no. 20, pp. 1-17.
PEDZIK, Marta - STUPER-SZABLEWSKA, Kinga - SYDOR, Maciej - ROGOZINSKI, Tomasz. Influence of grit size and wood species on the granularity of dust particles during sanding. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 22, pp. 1-9.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - OSVALDOVÁ, Linda Makovická - GAŠPERCOVÁ, Stanislava - SVETLÍK, Jozef - VRANIAK, Jozef. Tropical wood dusts - granulometry, morfology and ignition temperature. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 21, pp. 1-15.
KWIDZINSKI, Zdzislaw - BEDNARZ, Joanna - PEDZIK, Marta - SANKIEWICZ, Lukasz - SZAROWSKI, Piotr - KNITOWSKI, Bartlomiej - ROGOZINSKI, Tomasz. Innovative line for door production technoPORTA-technological and economic aspects of application of wood-based materials. In Applied sciences. ISSN 2076-3417, 2021, vol. 11, no. 10, art. no. 4502.
SYDOR, Maciej - MIRSKI, Radoslaw - STUPER-SZABLEWSKA, Kinga - ROGOZINSKI, Tomasz. Efficiency of machine sanding of wood. In Applied sciences. ISSN 2076-3417, 2021, vol. 11, no. 6, art. no. 2860.
GEJDOŠ, Miloš - LIESKOVSKÝ, Martin. Wood chip storage in small scale piles as a tool to eliminate selected risks. In Fotests. ISSN 1999-4907, 2021, vol. 12, no. 3, art. no. 289.
CANDELIER, Kevin - DIBDIAKOVA, Janka. A review on life cycle assessments of thermally modified wood. In Holzforschung. ISSN 0018-3830, 2021, vol. 75, no. 3, pp. 199-224.
SAFIN, Ruslan Rushanovich - SHAIKHUTDINOVA, Aigul Ravilevna - KHASANSHIN, Ruslan - MUKHAMETZYANOV, Shamil - SAFINA, Albina. Increasing the strength of the glue line in the production of thermally modified wood paneling. In Coatings. ISSN 2079-6412, 2021, vol. 11, no. 2, art. no. 253.
HERRERA-BUILES, Jhon F. - SEPÚLVEDA-VILLARROEL, Víctor - OSORIO, Jairo A. - SALVO-SEPÚLVEDA, Linette - ANANÍAS, Rubén A. Effect of thermal modification treatment on some physical and mechanical properties of pinus oocarpa wood. In Forests. ISSN 1999-4907, 2021, vol. 12, no. 2, pp. 1-9.
ZACHAR, Martin - CABALOVA, Iveta - KACIKOVA, Danica - JURCZYKOVA, Tereza. Effect of natural aging on oak wood fire resistance. In Polymers. ISSN 2073-4360, 2021, vol. 13, no. 13, pp. 1-10.
TAHA, Mona M. - SHAHY, Eman M. - MAHDY-ABDALLAH, Heba. Alteration in antioxidant status in slow and fast alleles of EPHX1 gene polymorphisms among wood workers. In Environmental science and pollution research international. ISSN 0944-1344, 2021, vol. 28, no. 36, pp. 49678-49684.
GEJDOŠ, Miloš - LIESKOVSKÝ, Martin. Selected risks in the storage of biomass in heating plants of urban-type : Slovakian case study. In WoodEMA 2021 : the response of the forest-based sector to changes in the global economy : 14th international scientific conference, Koper, 16th-18th June 2021. Zagreb : WoodEMA - International association for economics and management in wood processing and furniture manufacturing, 2021. ISBN 978-961614441-4, pp. 399-404.
SZABLEWSKI, Tomasz - SZWAJKOWSKA-MICHAŁEK, Lidia - PĘDZIK, Marta - ROGOZIŃSKI, Tomasz - STUPOR-SZABLEWSKA, Kinga. Contamination with microscopic fungi measured by the concentration of ergosterol in dusts of various types of wood with different granulation. In Annals of Warsaw University of Life Sciences. Forestry and wood technology. ISSN 1898-5912, 2021, no. 113, pp. 98-104.
NASIR, Vahid - FATHI, Hamidreza - FALLAH, Arezoo - KAZEMIRAD, Siavash - SASSANI, Farrokh - ANTOV, Petar. Prediction of mechanical properties of artificially weathered wood by color change and machine learning. In Materials. ISSN 1996-1944, 2021, vol. 14, no. 21, pp. 1-18.
CABALOVA, Iveta - ZACHAR, Martin - BELIK, Michal - BALAZOVA, Zaneta. Resistance of spruce wood (Picea abies L.) treated with a flame retardants after the radiant heat exposure. In Acta Facultatis Xylologiae Zvolen. ISSN 1336-3824, 2021, vol. 63, no. 2, pp. 103-116.
RAJKO, Lubomir - KOLEDA, Peter - BARCIK, Stefan - KOLEDA, Pavol. Technical and technological factors' effects on quality of the machined surface and energetic efficiency when planar milling heat-treated meranti wood. In BioResources. ISSN 1930-2126, 2021, vol. 16, no. 4, pp. 7884-7900.
MRACKOVA, Eva - SCHMIDTOVA, Jarmila - MARKOVA, Iveta - JADUDOVA, Jana - TUREKOVA, Ivana - HITKA, Milos. Fire parameters of spruce (Picea abies Karst. (L.)) dust layer from different wood technologies Slovak case study. In Applied scieneces (Basel). ISSN 2076-3417, 2022, vol. 12, no. 2, pp. 1-12.
KARNEFI, Amelya - HALIM, Rd. - SYUKRI, Muhammad - SIREGAR, Sri Astuti - ISLAM, Fahrul. Determinan dermatitis kontak pekerja pada perusahaan pembuatan slat pensil. In Jurnal kesehatan manarang. ISSN 2443-3861, 2022, vol. 8, no. 1, pp. 36-42.
SIMON, Caroline - DONNOT, Andre - MEAUSOONE, Pierre-Jean. Indoor wood dust analysis during machining with an original experimental device. In European journal of wood and wood products. ISSN 0018-3768, 2022, vol. 80, no. 2, pp. 465-475.
WIELAND, Simon - BALMES, Aylin - BENDER, Julian - KITZINGER, Jonas - MEYER, Felix - RAMSPERGER, Anja F. R. M. - ROEDER, Franz - TENGELMANN, Caroline - WIMMER, Benedikt H. - LAFORSCH, Christian - KRESS, Holger. From properties to toxicity : comparing microplastics to other airborne microparticles. In Journal of hazardous materials. ISSN 0304-3894, 2022, vol. 428, art. no. 128151, pp. 1-20.
MAJKA, Jerzy - ROGOZINSKI, Tomasz - OLEK, Wieslaw. Sorption and diffusion properties of untreated and thermally modified beech wood dust. In Wood science and technology. ISSN 0043-7719, 2022, vol. 56, no. 1, pp. 7-23.
MADANI, M. Znižennja zapilenosti povitrja robocoji zoni na derevoobrobnikh pidprijemstvach. In Tehnogenno-ekologìčna bezpeka. ISSN 2522-1892, 2022, vol. 11, no. 1, pp. 68-73.
CUI, Yunqi - YIN, Jian - CAI, Yitong - WANG, Huimin - DING, Tao - ZHU, Nanfeng. Morphological characteristics of bamboo panel milling dust derived from different average chip thicknesses. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-18.
DEMIR, Aydin - CAKIROGLU, Evren Osman - AYDIN, Ismail. Effects of CNC processing parameters on surface quality of wood-based panels used in furniture industry. In Drvna industrija. ISSN 0012-6772, 2022, vol. 73, no. 4, pp. 363-371.
ZHOU, Xihe - LI, Xiaoxu - CUI, Zhongwen - WU, Lin - ZHOU, Handong - LU, Xiaoning. Combustible wood dust explosions and impacts on environments and health - a review. In Environmental research. ISSN 0013-9351, 2023, vol. 216, art. no. 114658, pp. 1-17.
SANTAMARIA-HERRERA, Alba - HOYUELOS, F. Javier - CASADO-MARCOS, Carlos. Characterization of the explosiveness of wood dust. In Process safety and environmental protection. ISSN 0957-5820, 2023, vol. 169, pp. 252-259.
PONPRATHOM, Yothin. Design and development of protective equipment from noise and dustof circular saws. In Advanced science journal. ISSN 1513-9980, 2022, vol. 22, no. 2, pp. R1-R20.
KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15.
BAATJIES, Roslynn - CHAMBA, Paulino - JEEBHAY, Mohamed F. Wood dust and asthma. In Current opinion in allergy and clinical immunology. ISSN 1528-4050, 2023, vol. 23, no. 2, pp. 76-84.
ČAVLOVIĆ, Anka Ozana - BEŠLIĆ, Ivan - PERVAN, Stjepan - PREKRAT, Silvana. Characteristics of thermally modified hardwood dust in determining workers’ occupational exposure. In BioResources. ISSN 1930-2126, 2023, vol. 18, no. 2, pp. 3923-3937.
CHAMBA, Paulino S. - BAATJIES, Roslynn - SINGH, Tanusha S. - CUMBANE, Antonio J. - JEEBHAY, Mohamed F. Exposure characterization of wood dust particulate, endotoxins, and (1-3)-β-d-glucans, and their determinants in Mozambiquan wood processing workers. In Annals of work exposures and health. ISSN 2398-7308, 2023, vol. 67, no. 4, pp. 485-495.
DALL'OSTO, Gianluca - MOMBELLI, Davide - PITTALIS, Andrea - MAPELLI, Carlo. Biochar and other carbonaceous materials used in steelmaking : possibilities and synergies for power generation by direct carbon fuel cell. In Biomass and bioenergy. ISSN 0961-9534, 2023, vol. 177, pp. 1-12.
GEJDOŠ, Miloš - LIESKOVSKÝ, Martin. Overview of health and safety risks in the process of production and storage of forest biomass for energy purposes - a review. In Energies. ISSN 1996-1073, 2024, vol. 17, no. 5, pp. 1-18.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika nerozpoznaný
Názov Functionality of beech bark in adhesive mixtures used in plywood and its effect on the stability associated with material systems Aut.údaje Roman Réh, Rastislav Igaz ... [et al.] Autor Réh Roman (24%)
Spoluautori Igaz Rastislav (24%)
Krišťák Ľuboš (24%)
Ružiak Ivan (8%)
Gajtanska Milada (4%)
Božíková Monika (8%)
Kučerka Martin 1980- (8%) UMBFP07 - Katedra techniky a technológií
Zdroj.dok. Materials. Vol. 12, no. 8 (2019), pp. 1-15. - Basel : Multidisciplinary Digital Publishing Institute, 2019 Kľúč.slová buková kôra - beech bark ecological analysis výroba - produkcia - production Form.deskr. články - journal articles Jazyk dok. angličtina Krajina Švajčiarsko Systematika 62 Anotácia The results of research into utilizing grinded beech bark in order to substitute commonly used fillers in urea formaldehyde (UF) adhesive mixtures to bond plywood are presented in the present study. Four test groups of plywood with various adhesive mixtures were manufactured under laboratory conditions and used for experimentation. Plywood made using the same technology, with the common filler (technical flour), was used as a reference material. Three different concentrations of grinded beech bark were used. The thermal conductivity of the fillers used, viscosity and its time dependence, homogeneity and the dispersion performance of fillers were evaluated in the analysis of adhesive mixture. The time necessary for heating up the material during the pressing process was a further tested parameter. The produced plywood was analyzed in terms of its modulus of elasticity, bending strength, perpendicular tensile strength and free formaldehyde emissions. Following the research results, beech bark can be characterized as an ecologically friendly alternative to technical flour, shortening the time of pressing by up to 27%. At the same time, in terms of the statistics, the mechanical properties and stability of the material changed insignificantly, and the formaldehyde emissions reduced significantly, by up to 74%. The utilization of bark was in compliance with long-term sustainability, resulting in a decrease in the environmental impact of waste generated during the wood processing Kategória publikačnej činnosti ADC Číslo archívnej kópie 45237 Kategória ohlasu HEMMILÄ, Venla - ADAMOPOULOS, Stergios - HOSSEINPOURPIA, Reza - AHMED, Sheikh Ali. Ammonium lignosulfonate adhesives for particleboards with pMDI and furfuryl alcohol as crosslinkers. In Polymers. ISSN 2073-4360, 2019, vol. 11, no. 10, pp. 1-17.
SALCA, Emilia Adela - HIZIROGLU, Salim. Hardness and roughness of overlaidwood composites exposed to a high-humidity environment. In Coatings. ISSN 2079-6412, 2019, vol. 9, no. 11.
HASSANI, Vahid - TAGHIYARI, Hamid R. - SCHMIDT, Olaf - MALEKI, Sadegh - PAPADOPOULOS, Antonios N. Mechanical and physical properties of oriented strand lumber : the effect of fortification level of nanowollastonite on UF Resin. In Polymers. ISSN 2073-4360, 2019, vol. 11, no. 11, pp. 1-14.
ZHAO, Zhongyuan - SUN, Shijing - WU, Di - ZHANG, Min - HUANG, Caoxing - UMEMURA, Kenji - YONG, Qiang. Synthesis and characterization of sucrose and ammonium dihydrogen phosphate (SADP) adhesive for plywood. In Polymers. ISSN 2073-4360, 2019, vol. 11, no. 12, pp. 1-16.
ZHAO, Zhongyuan - SAKAI, Shunsuke - WU, Di - CHEN, Zhen - ZHU, Nan - HUANG, Caoxing - SUN, Shijing - ZHANG, Min - UMEMURA, Kenji - YONG, Qiang. Further exploration of sucrose-citric acid adhesive : investigation of optimal hot-pressing conditions for plywood and curing behavior. In Polymers. ISSN 2073-4360, 2019, vol. 11, no. 12, pp. 1-14.
MIRSKI, Radoslaw - KAWALERCZYK, Jakub - DZIURKA, Dorota - WIERUSZEWSKI, Marek - TROCINSKI, Adrian. Effects of using bark particles with various dimensions as a filler for urea-formaldehyde resin in plywood. In BioResources. ISSN 1930-2126, 2020, vol. 15, no. 1, pp. 1692-1701.
KAWALERCZYK, Jakub - SIUDA, Joanna - MIRSKI, Radoslaw - DZIURKA, Dorota. Hemp flour as a formaldehyde scavenger for melamine-urea-formaldehyde adhesive in plywood production. In BioResources. ISSN 1930-2126, 2020, vol. 15, no. 2, pp. 4052-4064.
GERGEĽ, Tomáš - SEDLIAK, Maroš - BUCHA, Tomáš - ORAVEC, Milan - SLAMKA, Marian - PASTOR, Michal. Prediction model of wooden logs cutting patterns and its efficiency in practice. In Applied sciences - Basel. ISSN 20786-3417, 2020, vol. 10, no. 9, pp. 1-17.
BARBU, Marius Catalin - SEPPERER, Thomas - TUDOR, Eugenia Mariana - PETUTSCHNIGG, Alexander. Walnut and hazelnut shells : untapped industrial resources and their suitability in lignocellulosic composites. In Applied sciences - Basel. ISSN 2076-3417, 2020, vol. 10, no. 18, pp. 1-11.
KAWALERCZYK, Jakub - DZIURKA, Dorota - MIRSKI, Radoslaw - SIUDA, Joanna. The reduction of adhesive application in plywood manufacturing by using nanocellulose-reinforced urea-formaldehyde resin. In Journal of applied polymer science. ISSN 0021-8995, 2020, vol. 138, no. 7.
JIMENEZ, Jr. Juanito - ACDA, Menandro - RAZAL, Ramon et al. Effect of tobacco stalk additive particle size on the bond strength and formaldehyde emission of urea formaldehyde bonded plywood. In Philippine journal of science. ISSN 0031-7683, 2020, vol. 149, no. 2, pp. 333-342.
TAGHIYARI, Hamid R. - HOSSEINI, Seyed Behzad - GHAHRI, Saman - GHOFRANI, Mohammad - PAPADOPOULOS, Antonios N. Formaldehyde emission in micron-sized wollastonite-treated plywood bonded with soy flour and urea-formaldehyde resin. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 19, pp. 1-14.
ANTOV, Petar - SAVOV, Viktor - NEYKOV, Nikolay. Reduction of formaldehyde emission from engineered wood panels by formaldehyde scavengers - a review. In Sustainability of forest-based industries in the global economy proceedings of scientific papers. In Joint 13th international scientific conference WoodEMA 2020 and the 31st international scientific conference ICWST 2020, Vinkovci, Croatia, 28th - 30th September 2020. Zagreb : WoodEMA, 2020. ISBN 978-953578228-5, pp. 289-294.
KAWALERCZYK, Jakub - DZIURKA, Dorota - MIRSKI, Radosław. The possible reduction of phenol-formaldehyde resin spread rate by its nanocellulose-reinforcement in plywood manufacturing process. In Annals of Warsaw University of life sciences. ISSN 1898-5912, 2020, no. 111, pp. 21-26.
BARBU, Marius Catalin - LOHNINGER, Yasmin - HOFMANN, Simon - KAIN, Guenther - PETUTSCHNIGG, Alexander - TUDOR, Eugenia Mariana. Larch bark as a formaldehyde scavenger in thermal insulation panels. In Pomylers. ISSN 2073-4360, 2020, vol. 12, no. 11, pp. 1-10.
ANTOV, Petar - JIVKOV, Vassil - SAVOV, Viktor - SIMEONOVA, Ralitsa - YAVOROV, Nikolay. Structural application of eco-friendly composites from recycled wood fibres bonded with magnesium lignosulfonate. In Applied science - Basel. ISSN 2076-3417, 2020, vol. 10, no. 21, pp. 1-12.
MIRSKI, Radoslaw - KAWALERCZYK, Jakub - DZIURKA, Dorota - SIUDA, Joanna - WIERUSZEWSKI, Marek. The application of oak bark powder as a filler for melamine-urea-formaldehyde adhesive in plywood manufacturing. In Forests. ISSN 1999-4907, 2020, vol. 11, no. 12, pp. 1-12.
BEKHTA, Pavlo - SEDLIACIK, Jan - NOSHCHENKO, Gregory - KACIK, Frantisek - BEKHTA, Nataliya. Characteristics of beech bark and its effect on properties of UF adhesive and on bonding strength and formaldehyde emission of plywood panels. In European journal of wood and wood products. ISSN 0018-3768, 2021, vol. 79, no. 2, pp. 423-433.
ARISTRI, Manggar Arum - LUBIS, Muhammad Adly Rahandi - YADAV, Sumit Manohar - ANTOV, Petar - PAPADOPOULOS, Antonios N. - PIZZI, Antonio - FATRIASARI, Widya - ISMAYATI, Maya - ISWANTO, Apri Heri. Recent developments in lignin- and tannin-based non-isocyanate polyurethane resins for wood adhesives - a review. In Applied sciences (Basel). ISSN 2076-3417, 2021, vol. 11, no. 9, pp. 1-29.
RAMOS, Ana - BRIGA-SA, Ana - PEREIRA, Sandra - CORREIA, Mariana - PINTO, Jorge - BENTES, Isabel - TEIXEIRA, Carlos A. Thermal performance and life cycle assessment of corn cob particleboards. In Journal of building engineering. ISSN 2352-7102, 2021, vol. 44, art. no. 102998, pp. [1-13].
KAWALERCZYK, Jakub - DZIURKA, Dorota - MIRSKI, Radostaw - SIUDA, Joanna - BABICKA, Marta. Possibility of use of NCC-reinforced melamine-urea formaldehyde adhesive in plywood manufacturing. In Drvna industrija. ISSN 0012-6772, 2021, vol. 72, no. 3, pp. 279-289.
VALCHEV, Ivo - YORDANOV, Yvailo - SAVOV, Viktor - ANTOV, Petar. Optimization of the hot-pressing regime in the production of eco-friendly fibreboards bonded with hydrolysis lignin. In Periodica polytechnica : chemical engineering. ISSN 0324-5853, 2022, vol. 66, no. 1, pp. 125-134.
KOYNOV, Daniel - GRIGOROV, Rosen - VALYOVA, Miglena. A novel method for producing a glulam from the wood of peeler cores. In Maderas : ciencia y tecnologia. ISSN 0717-3644, 2022, vol. 24, art. no. 4, pp. 1-8.
KAWALERCZYK, Jakub - SIUDA, Joanna - DZIURKA, Dorota - MIRSKI, Radosław - WOŹNIAK, Magdalena - STUPER-SZABLEWSKA, Kinga. The soy flour as an extender for uf and muf adhesives in birch plywood production. In Wood research. ISSN 1336-4561, 2021, vol. 66, no. 6, pp. 1015-1031.
JORDA, Johannes - KAIN, Guenther - BARBU, Marius-Catalin - KOELL, Berndt - PETUTSCHNIGG, Alexander - KRAL, Pavel. Mechanical properties of cellulose and flax fiber unidirectional reinforced plywood. In Polymers. ISSN 2073-4360, 2022, vol. 14, no. 4, pp. 1-15.
MIRSKI, Radoslaw - DERKOWSKI, Adam - KAWALERCZYK, Jakub - DZIURKA, Dorota - WALKIEWICZ, Joanna. The possibility of using pine bark particles in the chipboard manufacturing process. In Materials. ISSN 1996-1944, 2022, vol. 15, no. 16, pp. 1-11.
KAWALERCZYK, Jakub - DZIURKA, Dorota - POLAND, Radoslaw Mirski. The effect of a phenol-formaldehyde adhesive reinforcement with nanocellulose on the pressing parameters of plywood. In Wood research. ISSN 1336-4561, 2022, vol. 67, no. 5, pp. 796-808.
WALKIEWICZ, Joanna - KAWALERCZYK, Jakub - MIRSKI, Radoslaw - DZIURKA, Dorota - WIERUSZEWSKI, Marek. The application of various bark species as a fillers for UF resin in plywood manufacturing. In Materials. ISSN 1996-1944, 2022, vol. 15, no. 20, pp. 1-9.
CHANDA, Avishek - KIM, Nam Kyeun - BHATTACHARYYA, Debes. Effects of adhesive systems on the mechanical and fire-reaction properties of wood veneer laminates. In Composites science and technology. ISSN 0266-3538, 2022, vol. 230, art. no. 109331, pp. 1-9.
SUTIAWAN, Jajang - HERMAWAN, Dede - MASSIJAYA, Muhammad Yusram - KUSUMAH, Sukma Surya - LUBIS, Muhammad Adly Rahandi - MARLINA, Resti - PURNOMO, Deni - SULASTININGSIH, Ignasia Maria. Influence of different hot-pressing conditions on the performance of eco-friendly jabon plywood bonded with citric acid adhesive. In Wood material science and engineering. ISSN 1748-0272, 2022, vol. 17, no. 6, pp. 400-409.
LIU, Jinming - MO, Hailin - XIE, Enjun - FANG, Jianlin - HOU, Zhibing - GAN, Weixing. Utilization of carbon black from Mao bamboo as reinforcing agent for melamine urea formaldehyde resin wood adhesive. In Industrial crops and products. ISSN 0926-6690, 2022, vol. 187, part A, art. no. 115373, pp. 1-10.
AMINI, Mohd H. M. - HERMAWAN, Andi - SULAIMAN, Nurul S. - SOBRI, Sharizal A. - DEMIREL, Gaye K. Evaluation of environmentally friendly plywood made using glutaraldehydemodified starch as the binder. In Bulletin of the Transilvania university of Brasov, series 2 : forestry, wood industry, agricultural food engineering. ISSN 2065-2135, 2022, vol. 15(64), no. 2, pp. 65-76.
DAI, Changfa - YE, Lin - HE, Wenjun - ZHAO, Xiaowen. Urea-glutaraldehyde-formaldehyde resin with low formaldehyde emission and high flexibility: structure and toughening mechanism. In Polymer engineering and science. ISSN 0032-3888, 2023, vol. 63, no. 2, pp. 499-508.
DEMIR, Aydin. Determination of the effect of valonia tannin when used as a filler on the formaldehyde emission and adhesion properties of plywood with artificial neural network analysis. In International journal of adhesion and adhesives. ISSN 0143-7496, 2023, vol. 123, art. no. 103346, pp. 1-12.
BEKHTA, Pavlo. Recent developments in eco-friendly wood-based composites 2. In Polymers. ISSN 2073-4360, 2023, vol. 15, no. 8, pp. 1-6.
PANDEY, Sudip - PANT, Poonam. Possibilities and challenges for harnessing tree bark extracts for wood adhesives and green chemicals and its prospects in Nepal. In Forest science and technology. ISSN 2158-0103, 2023, vol. 19, no. 1, pp. 68-77.
KOYNOV, Daniel - VALYOVA, Miglena. Utilization of peeler cores for producing beams with hollow cross-section. In Drewno. ISSN 1644-3985, 2022, vol. 65, no. 210, pp. 1-12.
TAGHIYARI, Hamid R. - MORRELL, Jeffrey J. - HUSEN, Azamal. Emerging nanomaterials for forestry and associated sectors: an overview. In Emerging nanomaterials: opportunities and challenges in forestry sectors. Cham : Springer Nature Switzerland AG, 2022. ISBN 978-3-031-17377-6, pp. 1-24.
PORWAL, Paras - TAGHIYARI, Hamid R. - HUSEN, Azamal. Use of nanomaterials in the forest industry. In Advances in smart nanomaterials and their applications. Amsterdam : Elsevier, 2023. ISBN 978-0-323-99546-7, pp. 469-487.
SUTIAWAN, Jajang - SYAHFITRI, Alifah - PURNOMO, Deni - SUDARMANTO - NARTO - AKBAR, Fazhar - TRIWIBOWO, Dimas - ISMADI - AMANDA, Putri - KUSUMAH, Sukma Surya - LUBIS, Muhammad Adly Rahandi - HERMAWAN, Dede - SULASTININGSIH, Ignasia Maria - NURYAWAN, Arif - HAKIM, Luthfi. Characterization and application of non-formaldehyde binder based citric acid, maleic acid, and molasses adhesive for plywood composite. In Polymers. ISSN 2073-4360, 2023, vol. 15, no. 19, pp. 1-13.
ONAT, Saadettin Murat - ÖZDEMIR, Serkan. Optimization of production parameters of densified laminated veneer lumber produced by using urea-formaldehyde resin. In Drvna Industrija. ISSN 0012-6772, 2023, vol. 74, no. 3, pp. 327-335.
DASIEWICZ, Julia - WRONKA, Anita. Influence of the use of chestnut starch as a binder filler in plywood technology. In Annals of Warsaw university of life sciences SGGW : forestry and wood technology. ISSN 1898-5912, 2023, no. 122, pp. 137-148.
MITRA, Supram - GANGULY, Sauradipta - SAMANI, Ajmal. Effect of thermal modification on mechanical, physical and biological properties ofi Picea abies (L.) H.Karst. In New Zealand journal of forestry science. ISSN 0048-0134, 2023, vol. 53, art. no. 11, pp. 1-9.
RAMADHAN, Ali - CAHYANINGRUM, Dinar. Physical exploration of materials as a method to determine the maximum limit of the attainment shapes of three-ply plywood. In Journal of optimization in industrial engineering [online]. 2023, vol. 16, no. 2, pp. 351-367 [cit. 2024-02-21]. ISSN 2423-3935. Dostupné na: https://sanad.iau.ir/Journal/jie/Article/950860
DUKARSKA, Dorota - KAWALERCZYK, Jakub - KMIECIAK, Jakub. Modified pine needles as a formaldehyde scavenger for urea-formaldehyde resin in plywood production. In European journal of wood and wood products. ISSN 0018-3768, 2024, vol. 82, no. 1, pp. 147-158.
WRONKA, Anita - KOWALUK, Grzegorz. Upcycling of wood dust from particleboard recycling as a filler in lignocellulosic layered composite technology. In Materials. ISSN 1996-1944, 2023, vol. 16, no. 23, pp. 1-13.
SUTIAWAN, Jajang - HERMAWAN, Dede - HADI, Yusuf Sudo - NAWAWI, Deded Sarip - KUSUMAH, Sukma Surya - NINGRUM, Riska Surya - AMANDA, Putri - ISMAYATI, Maya - ABDILLAH, Imam Busyra. Properties of sorghum (Sorghum bicolor) biomass particleboard at different maleic acid content and particle size as potential materials for table tennis blade. In Biomass conversion and biorefinery. ISSN 2190-6815, 2024, vol. 14, no. 2, pp. 1607-1619.
TIAN, Wei - WANG, Xiaoyi - YE, Yuhang - WU, Weijie - WANG, Yuli - JIANG, Shaohua - WANG, Jiangbo - HAN, Xiaoshuai. Recent progress of biomass in conventional wood adhesives : a review. In Green chemistry. ISSN 1463-9262, 2023, vol. 25, no. 24, pp. 10304-10337.
YANG, Zhengyong - DUAN, Zhigang - YAN, Shi - WU, Haizhu - HUANG, Hui - HE, Lei - ESSAWY, Hisham - HUANG, Heming - ZHOU, Xiaojian - CHEN, Xinyi. Camellia oleifera shell powder and palm kernel meal as an environmentally-friendly, low-cost compound filler in MUF adhesive for plywood preparation. In International journal of adhesion and adhesives. ISSN 0143-7496, 2024, vol. 131, art. no. 103648, pp. 1-11.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika nerozpoznaný
Názov Granulometric analysis of sanding dust from selected wood species Aut.údaje Alena Očkajová, Martin Kučerka ... [et al.] Autor Očkajová Alena 1961- (58%) UMBFP07 - Katedra techniky a technológií
Spoluautori Kučerka Martin 1980- (14%) UMBFP07 - Katedra techniky a technológií
Krišťák Ľuboš (14%)
Igaz Rastislav (14%)
Zdroj.dok. BioResources. Vol. 13, no. 4 (2018), pp. 7481-7495. - Raleigh : North Carolina State University, 2018 Kľúč.slová wood dust granulometric analysis granularity Jazyk dok. slovenčina Krajina Spojené štáty Systematika 62 Anotácia Different types of sanders are used in every furniture and carpentry plant. The wood dust generated during sanding is considered one of the main health and safety hazards. The greatest danger to respiratory organs is a respirable (alveolar) component with a particle size of less than 10 μm. Thus, it is important to know the specific particle size fractions of wood dust. This study compared the granulometric compositions of abrasion wood dusts of selected wood species (beech and oak) and determined the statistical significance of individual factors (type of sander, wood species, grain size of sander, sanding direction) that affect the percentage of fractions ≤ 0.08 mm. The results confirmed that the use of narrow band and handheld (belt and disc) sanders caused high percentages of fractions ≤ 0.08 mm, above 90% in all cases. In these types of sanders, the working part of the sander is not completely covered, and the operator is in direct contact with the machine. Despite the use of a suction device, a certain amount of dust remains suspended in the air, or it settles on surfaces. In both cases, this dust poses a health and safety hazard URL Link na plný text Kategória publikačnej činnosti ADC Číslo archívnej kópie 42672 Kategória ohlasu KMINIAK, Richard - DZURENDA, Ladislav. Impact of sycamore maple thermal treatment on a granulometric composition of chips obtained due to processing on a CNC machining mentre. In Sustainability. ISSN 2071-1050, 2019, vol. 11, no. 3, pp. 1-10.
KMINIAK, Richard - DZURENDA, Ladislav. Granulometric composition of chips from the milling process of spruce on a CNC machining center. In Annals of Warsaw University of life sciences - SGGW (Forestry and Wood Technology). ISSN 1898-5912, 2018, no. 104, pp. 48-52.
MOJŽIŠ, Miroslav - BUBENÍKOVÁ, Tatiana - ZACHAR, Martin - KACIKOVÁ, Danica - STEFKOVÁ, Jaroslava. Comparison of natural and synthetic sorbents' efficiency at oil spill removal. In BioResources . ISSN 1930-2126, 2019, vol. 14, no. 4, pp. 8738-8752.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - MAKOVICKÁ-OSVALDOVÁ, Linda - GAŠPERCOVÁ, Stanislava - SVETLÍK, Jozef. Evaluation of African Padauk (Pterocarpus soyauxii) explosion dust. In BioResources. ISSN 1930-2126, 2020, vol. 15, no. 1, pp. 401-414.
DADO, Miroslav - MIKUŠOVÁ, Lucia - SCHWARZ, Marian - HNILICA, Richard. Effect of selected factors on mass concentration of airborne dust during wood sanding. In MM Science journal. ISSN 1803-1269, 2019, vol. 2019, pp. 3679-3682.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta. Ignition of wood dust of African Padauk (Pterocarpus Soyauxii). In International scientific conference on woods and fire safety. Springer : Cham, 2020. ISBN 978-3-030-41234-0, pp. [1-4].
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - OSVALDOVÁ, Linda Makovicka - GAŠPERCOVÁ, Stanislava - SVETLÍK, Jozef - VRANIAK, Jozef. Tropical wood dusts-granulometry, morfology and ignition temperature. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 21, pp. 1-15.
PEDZIK, Marta - STUPER-SZABLEWSKA, Kinga - SYDOR, Maciej - ROGOZINSKI, Tomasz. Influence of grit size and wood species on the granularity of dust particles during sanding. In Applied sciences. ISSN 2076-3417, 2020, vol. 10, no. 22, pp. 1-9.
ROGOZINSKI, Tomasz - CHUCHALA, Daniel - PEDZIK, Marta - ORLOWSKI, Kazimierz A. - DZURENDA, Ladislav - MUZINSKI, Tomasz. Influence of drying mode and feed per tooth rate on the fine dust creation in pine and beech sawing on a mini sash gang saw. In European journal of wood and wood products. ISSN 0018-3768, 2021, vol. 79, no. 1, pp. 91-99.
KWIDZINSKI, Zdzislaw - BEDNARZ, Joanna - PEDZIK, Marta - SANKIEWICZ, Lukasz - SZAROWSKI, Piotr - KNITOWSKI, Bartlomiej - ROGOZINSKI, Tomasz. Innovative line for door production technoPORTA - technological and economic aspects of application of wood-based materials. In Applied sciences. ISSN 2076-3417, 2021, vol. 11, no. 10, art. no. 4502, pp. 1-20.
SYDOR, Maciej - MIRSKI, Radoslaw - STUPER-SZABLEWSKA, Kinga - ROGOZINSKI, Tomasz. Efficiency of machine sanding of wood. In Applied sciences. ISSN 2076-3417, 2021, vol. 11, no. 6, art. no. 2860, pp. 1-12.
VANDLIČKOVÁ, Miroslava - MARKOVÁ, Iveta - HOLLÁ, Katarína - GAŠPERCOVÁ, Stanislava. Evaluation of marblewood dust's (Marmaroxylon racemosum) effect on ignition risk. In Applied sciences - Basel. ISSN 2076-3417, 2021, vol. 11, no. 15, art. no. 6874, pp. 1-9.
GEJDOŠ, Miloš - LIESKOVSKÝ, Martin. Selected risks in the storage of biomass in heating plants of urban-type : Slovakian case study. In WoodEMA 2021 : the response of the forest-based sector to changes in the global economy : 14th international scientific conference, Koper, 16th-18th June 2021. Zagreb : WoodEMA - International association for economics and management in wood processing and furniture manufacturing, 2021. ISBN 978-961614441-4, pp. 399-404.
MRAČKOVÁ, Eva - SCHMIDTOVÁ, Jarmila - KMEŤOVÁ, Elena - KAČÍKOVÁ, Danica. Granulometric analysis of spruce wood dust. In Delta (Zvolen). ISSN 1337-0863, 2021, vol. 15, no. 1, pp. 50-57.
DEMBINSKI, Czeslaw - POTOK, Zbigniew - DOLNY, Stanislaw - KMINIAK, Richard - ROGOZINSKI, Tomasz. Performance of filter bags used in industrial pulse-jet baghouses in wood-based panels furniture factory. In Applied sciences (Basel). ISSN 2076-3417, 2021, vol. 11, no. 19, pp. 1-15.
VANDLÍČKOVÁ, Miroslava - MARKOVÁ, Iveta - GAŠPERCOVÁ, Stanislava - HOLLÁ, Katarína. Effect of particle size distribution of cumar dust on risk of initiation. In Waste forum. ISSN 1804-0195, 2021, no. 4, pp. 273-285.
GALLO, Pietro - FAILLA, Sabina - BIOCCA, Marcello - PARIS, Enrico - GALLUCCI, Francesco - FORNACIARI, Laura - SCHILLACI, Giampaolo. Exposure to heavy metals in wood dust during dry-pruning in vineyard. In Lecture notes in civil engineering : 06th international conference on safety, health and welfare in agriculture and agro-food systems (SHWA 2021), online, 15th-18th September 2021. ISSN 2366-2557, 2022, vol. 252 LNCE, pp. 207-215.
TUREKOVA, Ivana - MARKOVA, Iveta - SVENTEKOVA, Eva - HARANGOZO, Jozef. Evaluation of microclimatic conditions during the teaching process in selected school premises. Slovak case study. In Energy. ISSN 0360-5442, 2022, vol. 239, part D, art. no. 122161, pp. 1-8.
RATNASINGAM, Jegatheswaran. Sanding process. In Furniture manufacturing : a production engineering approach. Singapore : Springer Singapore, 2022. ISBN 978-981-16-9411-0, pp. 79-88.
CUI, Yunqi - YIN, Jian - CAI, Yitong - WANG, Huimin - DING, Tao - ZHU, Nanfeng. Morphological characteristics of bamboo panel milling dust derived from different average chip thicknesses. In Forests. ISSN 1999-4907, 2022, vol. 13, no. 9, pp. 1-18.
DADO, Miroslav - SALVA, Jozef - SCHWARZ, Marian - VANEK, Miroslav - BUSTIN, Lucia. Effect of grit size on airborne particle concentration and size distribution during oak wood sanding. In Applied sciences (Basel). ISSN 2076-34717, 2022, vol. 12, no. 15, pp. 1-14.
ZHOU, Xihe - LI, Xiaoxu - CUI, Zhongwen - WU, Lin - ZHOU, Handong - LU, Xiaoning. Combustible wood dust explosions and impacts on environments and health - a review. In Environmental research. ISSN 0013-9351, 2023, vol. 216, art. no. 114658, pp. 1-17.
PONPRATHOM, Yothin. Design and development of protective equipment from noise and dustof circular saws. In Advanced science journal. ISSN 1513-9980, 2022, vol. 22, no. 2, pp. R1-R20.
KOLEDA, Pavol - KOLEDA, Peter - HRČKOVÁ, Mária - JÚDA, Martin - HORTOBÁGYI, Áron. Experimental granulometric characterization of wood particles from CNC machining of chipboard. In Applied sciences. ISSN 2076-3417, 2023, vol. 13, no. 9, pp. 1-15.
BIOCCA, Marcello - POCHI, Daniele - GALLO, Pietro - FANIGLIULO, Roberto. Air-borne particle size distribution of wood dust emitted during small scale forestry operations. In Journal of basic and applied sciences [online]. 2023, vol. 19, pp. 60-67 [cit. 2023-09-06]. ISSN 1927-5129. Dostupné na: https://doi.org/10.29169/1927-5129.2023.19.05
SHER, Farooq - BOŠKAILO, Emina - SMJEČANIN, Narcisa - NEMȚANU, Monica R. - SHER, Emina K. - LIMA, Eder C. Magnetic multifunctional nanomaterials for enhanced transverse chemical and bioanalytical applications - a review. In TrAC trends in analytical chemistry. ISSN 0165-9936, 2024, vol. 173, art. no. 117622, pp. 1-19.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika nerozpoznaný
Názov Influence of urea-formaldehyde adhesive modification with beech bark on chosen properties of plywood Aut.údaje Ivan Ružiak ... [et al.] Autor Ružiak Ivan (10%)
Spoluautori Igaz Rastislav (25%)
Krišťák Ľuboš (10%)
Réh Roman (20%)
Mitterpach Jozef (10%)
Očkajová Alena 1961- (15%) UMBFP07 - Katedra techniky a technológií
Kučerka Martin 1980- (10%) UMBFP07 - Katedra techniky a technológií
Zdroj.dok. BioResources. Vol. 12, no. 2 (2017), pp. 3250-3264. - Raleigh : North Carolina State University, 2017 Kľúč.slová drevo - wood alternatívne energetické zdroje - alternative energy sources Jazyk dok. angličtina Krajina Spojené štáty Systematika 674 Anotácia The influence of beech bark concentrations as filler in urea-formaldehyde (UF) adhesives was investigated relative to the composite forming process and selected properties of final 5-layer beech plywood. Beech bark was used as filler to lower the wood processing waste production and decrease formaldehyde emissions. A combination of UF adhesives filled with different beech bark concentrations as the adhesive was used. Three different concentrations of beech bark, 15 wt.%, 20 wt.%, and 25 wt.% were used in the experiment. Urea-formaldehyde adhesive filled with 20 wt.% technical flour was used as a reference sample. The effect of the filler was studied via its temperature profile during pressing, mechanical properties in bending, water absorption, thickness swelling, and formaldehyde emissions after pressing. The time needed to reach the temperature between the beech veneers, at least 105 degrees C, which was equal to the final temperature filler-adhesive-wood matrix cross-linking, was also investigated during the pressing process. The measurements of the free formaldehyde emissions showed that for samples with non-zero bark concentrations there was a decrease of formaldehyde emissions by at least 46%. Kategória publikačnej činnosti ADC Číslo archívnej kópie 39995 Kategória ohlasu SVOBODA, Tomáš - GAFFOVÁ, Zuzana - RAJNOHA, Rastislav - ŠATANOVÁ, Anna - KMINIAK, Richard. Bending forces at the proportionality limit and the maximum technological innovations for better performance in wood processing companies. In BioResources. ISSN 1930-2126, 2017, vol. 12, no. 2, pp. 4146-4165.
MATYAŠOVSKÝ, Ján - SEDLIAČIK, Ján - VALACHOVÁ, Katarína et al. Antioxidant effects of keratin hydrolysates. In The journal of the American leather chemists association. ISSN 0002-9726, 2017, vol. 112, no. 10, pp. 327-337.
BEKHTA, Pavlo - SALCA, Emilia Adela. Influence of veneer densification on the shear strength and temperature behavior inside the plywood during hot press. In Construction and building materials. ISSN 0950-0618, 2018, vol. 162, pp. 20-26.
SOUZA, Amos M. - NASCIMENTO, Maria F. - ALMEIDA, Diego H. - LOPES SILVA, Diogo A. - ALMEIDA, Tiago H. - CHRISTOFORO, Andre L. - LAHR, Francisco A. R. Wood-based composite made of wood waste and epoxy based ink-waste as adhesive : a cleaner production alternative. In Journal of cleaner production. ISSN 0959-6526, 2018, vol. 193, pp. 549-562.
CHRISTOFORO, André L. - DE SOUZA, Amós M. - DE ALMEIDA, Diego H. - DE ALMEIDA, Tiago H. - LAHR, Francisco A. R. Particleboards produced with epoxy ink waste and bth polymer as adhesives. In Engenharia agricola. ISSN 0100-6916, 2018, vol. 38, no. 5, pp. 797-804.
MATYAŠOVSKÝ, Ján - SEDLIAČIK, Ján - ŠIMON, Peter - NOVÁK, Igor - KRYŠTOFIAK, Tomasz - JURKOVIČ, Peter - DUCHOVIČ, Peter - SEDLIAČIKOVÁ, Mariana - CIBULKOVÁ, Zuzana - MICUSIK, Matej - KLEINOVÁ, Angela. Antioxidant activity of keratin hydrolysates studied by DSC. In Journal of the american leather chemists association. ISSN 0002-9726, 2019, vol. 114, no. 1, pp. 20-28.
FERRO, F. S. - ALMEIDA, T. H. de - SOUZA, A. M. de - ALMEIDA, D. H. de - CHRISTOFORO, A. L. - LAHR, F. A. R. Painel híbrido OSB/MDP de madeira Pinus taeda e resina poliuretana à base de óleo de mamona. ISSN 1678-8621, 2019, vol. 19, no. 3, pp. 7-14.
JANISZEWSKA, Dominika. Bark liquefaction for use in three-layer particleboard bonding. In Drewno. ISSN 1644-3985, 2018, vol. 61, no. 202, pp. 119-127.
MEDVED, Sergej - GAJSEK, Urska - TUDOR, Eugenia Mariana - BARBU, Marius Catalin - ANTONOVIC, Alan. Efficiency of bark for reduction of formaldehyde emission from particleboards. In Wood research. ISSN 1336-4561, 2019, vol. 64, no. 2, pp. 307-316.
KAWALERCZYK, Jakub - DZIURKA, Dorota - MIRSKI, Radoslaw - TROCINSKI, Adrian. Flour fillers with urea-formaldehyde resin in plywood. In BioResources. ISSN 1930-2126, 2019, vol. 14, no. 3, pp. 6727-6735.
SALCA, Emilia Adela - HIZIROGLU, Salim. Hardness and roughness of overlaidwood composites exposed to a high-humidity environment. In Coatings. ISSN 2079-6412, 2019, vol. 9, no. 11.
ZHAO, Zhongyuan - SUN, Shijing - WU, Di - ZHANG, Min - HUANG, Caoxing - UMEMURA, Kenji - YONG, Qiang. Synthesis and characterization of sucrose and ammonium dihydrogen phosphate (SADP) adhesive for plywood. In Polymers. ISSN 2073-4360, 2019, vol. 11, no. 12, pp. 1-16.
ZHAO, Zhongyuan - SAKAI, Shunsuke - WU, Di - CHEN, Zhen - ZHU, Nan - HUANG, Caoxing - SUN, Shijing - ZHANG, Min - UMEMURA, Kenji - YONG, Qiang. Further exploration of sucrose-citric acid adhesive : investigation of optimal hot-pressing conditions for plywood and curing behavior. In Polymers. ISSN 2073-4360, 2019, vol. 11, no. 12.
MIRSKI, Radoslaw - KAWALERCZYK, Jakub - DZIURKA, Dorota - WIERUSZEWSKI, Marek - TROCINSKI, Adrian. Effects of using bark particles with various dimensions as a filler for urea-formaldehyde resin in plywood. In BioResources. ISSN 1930-2126, 2020, vol. 15, no. 1, pp. 1692-1701.
PÁSZTORY, Zoltán - HALÁSZ, Katalin - BÖRCSÖK, Zoltán - SRIVARO, Suthon. Properties of high density fiberboard mixed with poplar bark. In Walailak journal of science and technology. ISSN 1686-3933, 2020, vol. 17, no. 12, pp. 1286-1293.
FEKIAČ, Jozef. Vplyv perforácií na zmenu ohybových vlastností dvojvrstvého materiálu z dýh. In Nábytok a výrobky z dreva 2018 : medzinárodný vedecko-odborný seminár, 18. október 2018. Zvolen: Technická univerzita vo Zvolene, 2018. ISBN 978-80-228-3089-8, s. 51-60.
LADOMERSKÝ, Juraj - HRONCOVÁ, Emília. Environmentálne manažérstvo vo výrobnej sfére - VI. Výroba energie spaľovacími procesmi. Vysokoškolská učebnica. Banská Bystrica : Univerzita Mateja Bela v Banskej Bystrici 2016, 130 s. ISBN 978-80-557-1193-5.
MATYASOVSKY, Jan - SEDLIACIK, Jan - SIMON, Peter - NOVAK, Igor - JURKOVIC, Peter - DUCHOVIC, Peter - SEDLIACIKOVA, Mariana - CIBULKOVA, Zuzana - MICUSIK, Matej - KLEINOVA, Angela. Antioxidation activity of cysteine and cystine prepared from sheep wool. In Journal of the American leather chemists association. ISSN 0002-9726, 2020, vol. 115, no. 5, pp. 166-175.
KAWALERCZYK, Jakub - SIUDA, Joanna - MIRSKI, Radoslaw - DZIURKA, Dorota. Hemp flour as a formaldehyde scavenger for melamine-urea-formaldehyde adhesive in plywood production. In BioResources. ISSN 1930-2126, 2020, vol. 15, no. 2, pp. 4052-4064.
HOGGER, Elfriede M. - VAN HERWIJNEN, Hendrikus W. G. - MOSER, Johann - KANTNER, Wolfgang - KONNERTH, Johannes. Systematic assessment of wheat extenders in condensation resins for plywood production : part 1 : physico-chemical adhesive properties. In Journal of adhesion. ISSN 0021-8464, 2021, Vol. 97, no. 15, pp. 1404-1422.
ANTOV, Petar - SAVOV, Viktor - NEYKOV, Nikolay. Reduction of formaldehyde emission from engineered wood panels by formaldehyde scavengers - a review. In Sustainability of forest-based industries in the global economy proceedings of scientific papers. In Joint 13th international scientific conference WoodEMA 2020 and the 31st international scientific conference ICWST 2020, Vinkovci, Croatia, 28th-30th September 2020. Zagreb : WoodEMA, 2020. ISBN 978-953578228-5, pp. 289-294.
MARBUN, Sari Delviana - WAHYUDI, Imam - SURYANA, Jajang - NAWAWI, Deded Sarip. Bonding strength of benuang and duabanga glulams using their barks as phenol formaldehyde-filler. In Applied adhesion science. ISSN 2196-4351, 2020, vol. 8, no. 1.
ANTOV, Petar - JIVKOV, Vassil - SAVOV, Viktor - SIMEONOVA, Ralitsa - YAVOROV, Nikolay. Structural application of eco-friendly composites from recycled wood fibres bonded with magnesium lignosulfonate. In Applied science (Basel). ISSN 2076-3417, 2020, vol. 10, no. 21, pp. 1-12.
MIRSKI, Radoslaw - KAWALERCZYK, Jakub - DZIURKA, Dorota - SIUDA, Joanna - WIERUSZEWSKI, Marek. The application of oak bark powder as a filler for melamine-urea-formaldehyde adhesive in plywood manufacturing. In Forests. ISSN 1999-4907, 2020, vol. 11, no. 12, pp. 1-12.
SAVOV, Viktor - MIHAJLOVA, Julia - YOTOV, Nikola - MADJAROV, Bozhidar. Influence of hot-pressing temperature on properties of eco friendly dry-process fibrebords with lignosulfonate adhesive. In Innovation in woodworking industry and engineering design. ISSN 1314-6149, 2021, vol. 9, no. 1, pp. 29-36.
BEKHTA, Pavlo - SEDLIACIK, Jan - NOSHCHENKO, Gregory - KACIK, Frantisek - BEKHTA, Nataliya. Characteristics of beech bark and its effect on properties of UF adhesive and on bonding strength and formaldehyde emission of plywood panels. In European journal of wood and wood products. ISSN 0018-3768, 2021, vol. 79, no. 2, pp. 423-433.
BILGIN, Ugur - COLAKOGLU, Gursel. Effect of using urea formaldehyde modified with extracts in plywood on formaldehyde emission. In Drvna industrija. ISSN 0012-6772, 2021, vol. 72, no. 3, pp. 237-244.
MEDVED, S. - TUDOR, E. M. - BARBU, M. C. - YOUNG, T. M. Thermal conductivity of different bio-based insulation materials. In Les [online]. 2021, vol. 70, no. 1, pp. 73-82 [cit. 2021-12-05]. ISSN 2590-9932. Dostupné na: https://doi.org/10.26614/les-wood.2021.v70n01a05
AYRILMIS, Nadir. Advances in reducing formaldehyde emission from wood-based panels. In Innovations : international scientific journal. ISSN 2603-3771, 2021, vol. 9, no. 4, pp. 151-153.
VALCHEV, Ivo - YORDANOV, Yvailo - SAVOV, Viktor - ANTOV, Petar. Optimization of the hot-pressing regime in the production of eco-friendly fibreboards bonded with hydrolysis lignin. In Periodica polytechnica : chemical engineering. ISSN 0324-5853, 2022, vol. 66, no. 1, pp. 125-134.
FEKIAC, Jozef - GABORIK, Jozef - VOJTKULIAK, Marek. Properties of plywood made from perforated veneers. In Forests. ISSN 1999-4907, 2021, vol. 12, no. 12, pp. [1-13].
ABDOUL-LATIF, Fatouma Mohamed - EL MONTASSIR, Zineb - AINANE, Ayoub - GHARBY, Said - SAKAR, El Hassan - MERITO, Ali - MOHAMED, Jalludin - AINANE, Tarik. Use of thymus plants as an ecological filler in urea-formaldehyde adhesives intended for bonding plywood. In Processes. ISSN 2227-9717, 2022, vol. 10, no. 11, pp. 1-11.
KAWALERCZYK, Jakub - DZIURKA, Dorota - POLAND, Radoslaw Mirski. The effect of a phenol-formaldehyde adhesive reinforcement with nanocellulose on the pressing parameters of plywood. In Wood research. ISSN 1336-4561, 2022, vol. 67, no. 5, pp. 796-808.
WALKIEWICZ, Joanna - KAWALERCZYK, Jakub - MIRSKI, Radoslaw - DZIURKA, Dorota - WIERUSZEWSKI, Marek. The application of various bark species as a fillers for UF resin in plywood manufacturing. In Materials. ISSN 1996-1944, 2022, vol. 15, no. 20, pp. 1-9.
LIU, Jinming - LI, Yongfeng - MO, Hailin - XIE, Enjun - FANG, Jianlin - GAN, Weixing. Current utilization of waste biomass as filler for wood adhesives : a review. In Journal of industrial and engineering chemistry. ISSN 1226-086X, 2022, vol. 115, pp. 48-61.
BEKHTA, Pavlo. Recent developments in eco-friendly wood-based composites 2. In Polymers. ISSN 2073-4360, 2023, vol. 15, no. 8, pp. 1-6.
SEDLIAČIK, Ján - MATYAŠOVSKÝ, Ján - DUCHOVIČ, Peter - NOVÁK, Igor - JURKOVIČ, Peter. Keratin as a formaldehyde scavenger for environmentally friendly wood-based panels. In Acta facultatis xylologiae Zvolen. ISSN 1336-3824, 2023, vol. 65, no. 1, pp. 57-62.
SAVOV, Viktor. Nanomaterials to improve properties in wood-based composite panels. In Emerging nanomaterials : opportunities and challenges in forestry sectors. Cham : Springer Nature Switzerland AG, 2023. ISBN 978-3-031-17377-6, pp. 135-153.
DUKARSKA, Dorota - KAWALERCZYK, Jakub - KMIECIAK, Jakub. Modified pine needles as a formaldehyde scavenger for urea-formaldehyde resin in plywood production. In European journal of wood and wood products. ISSN 0018-3768, 2024, vol. 82, no. 1, pp. 147-158.
MEDVED, Sergej - VILMAN, Gregor - TAJHER, Urban - SEVER, Mark - ANTONOVIC, Alan. Kompoziti iz skorje : nova gozdarsko-lesarska vrednostna. In Gozdarski vestnik : slovenska strokovna revija za gozdarstvo. ISSN 0017-2723, 2023, vol. 81, no. 10, pp. 331-344.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika nerozpoznaný
Názov Thermophysical properties of OSB boards versus equilibrium moisture content Aut.údaje Rastislav Igaz, Ľuboš Krišťák ... [et al.] Autor Igaz Rastislav (30%)
Spoluautori Krišťák Ľuboš (25%)
Ružiak Ivan (25%)
Gajtanska Milada (10%)
Kučerka Martin 1980- (10%) UMBFP07 - Katedra techniky a technológií
Zdroj.dok. BioResources. Vol. 12, no. 4 (2017), pp. 8106-8118. - Raleigh : North Carolina State University, 2017 Kľúč.slová thermal conductivity specific heat capacity oriented strand board Jazyk dok. slovenčina Krajina Spojené štáty Systematika 62 Anotácia The basic thermophysical properties of oriented strand boards were determined experimentally for use in humid conditions (OSB3) depending on the moisture content. The dependency between the thermal conductivity, thermal diffusivity, specific heat capacity, and the moisture content in the range of 0% to 10%, was examined. The non-stationary extended dynamic plane source (EDPS) experimental method was used. EDPS method was modified for anisotropic materials, i.e. with special considerations of heat-loss effect occurring at the edge of measuring samples, finite geometry of the sample and orthotropic thermal conductivity, for use with anisotropic materials. The validity of the experimental method was verified on polymethylmethacrylate (PMMA) samples. The error rate of measurements conducted on PMMA samples was less than 3%, and for OSB3 boards it was less than 5.5%. Based on the experimental results, regression equations of the dependency between the monitored properties and the moisture content were determined. In the case of thermal conductivity and thermal capacity, the determined dependencies showed a high correlation rate URL Link na zdrojový dokument Kategória publikačnej činnosti ADC Číslo archívnej kópie 41924 Kategória ohlasu GEJDOŠ, Miloš - LIESKOVSKÝ, Martin - POTKÁNY, Marek - NOZDROVICKÝ, Ladislav. The future perspectives of spruce and fir wood use in selected countries of the Central Europe for wooden constructions. In 11th annual international scientific conference : increasing the use of wood in the global bio-economy, WoodEMA 2018, Belgrade, 26th-28th September 2018. Zagreb : WoodEMA, 2018. ISBN 978-867299277-9, pp. 160-167.
DANIHELOVÁ, Anna - NEMEC, Miroslav - GERGEĽ, Tomáš - GEJDOš, Miloš - GORDANOVÁ, Janka - SCENSNY, Patrik. Usage of recycled technical textiles as thermal insulation and an acoustic absorber. In Sustainability. ISSN 2071-1050, 2019, vol. 11, no. 10, pp. 1-13.
KASK, Regino - LILLE, Harri - KIVISTE, Mihkel - TAMM, Renee - REIGO, Valdor - LAANE, Johann Olaf. Evaluation of mechanical properties of OSB/3 after repetitive soaking and oven-drying cycles. In Wood material science and engineering. ISSN 1748-0272, 2021, vol. 16, no. 6, pp. 358-365.
MAAKE, Tebogo - ASANTE, Joseph - MWAKIKUNGA, Bonex. Fire performance properties of commonly used South African hardwood. In Journal of fire sciences. ISSN 0734-9041, 2020, vol. 38, no. 5, pp. 415-432.
BOARDMAN, Charles R. - GLASS, Samuel V. - CHOW, Kingston - YEH, Borjen. Hygrothermal modeling of wall drying after water injection. In Thermal performance of the exterior envelopes of whole buildings 14th international conference, Clearwater Beach, 09th-12th December 2019. [S. l.] : International building performance simulation association, 2019, pp. 887-894. [cit. 2020-11-30]. Dostupné na: https://www.apawood.org/data/sites/1/documents/technicalresearch/hygrothermal-modeling-of-wall-drying-after-water-injection.pdf
BOARDMAN, Charles R. - GLASS, Samuel. Improving the accuracy of a hygrothermal model for wood-frame walls : a cold-climate study. In Buldings. ISSN 2075-5309, 2020, vol. 10, no. 12.
TUREKOVA, Ivana - MARKOVA, Iveta - IVANOVICOVA, Martina - HARANGOZO, Jozef. Experimental study of oriented strand board ignition by radiant heat fluxes. In Polymers. ISSN 2073-4360, 2021, vol. 13, no. 5, pp. 1-13.
TAGHIYARI, Hamid R. - MILITZ, Holger - ANTOV, Petar - PAPADOPOULOS, Antonios N. Effects of wollastonite on fire properties of particleboard made from wood and chicken feather fibers. In Coatings. ISSN 2079-6412, 2021, vol. 11, no. 5, pp. 1-11.
NINIKAS, Konstantinos - MITANI, Andromachi - KOUTSIANITIS, Dimitrios - NTALOS, George - TAGHIYARI, Hamid R. - PAPADOPOULOS, Antonios N. Thermal and mechanical properties of green insulation composites made from cannabis and bark residues. In Journal of composites science. ISSN 2504-477X, 2021, vol. 5, no. 5, pp. 1-12.
BOŽIKOVÁ, Monika - KOTOULEK, Petr - BILČÍK, Matúš - KUBÍK, Ľubomír - HLAVÁČOVÁ, Zuzana - HLAVÁČ, Peter. Thermal properties of wood and wood composites made from wood waste. In International agrophysics. ISSN 0236-8722, 2021, vol. 35, no. 3, pp. 251-256.
ZACHAR, Martin - CABALOVA, Iveta - KACIKOVA, Danica - ZACHAROVA, Lucia. The effect of heat flux to the fire-technical and chemical properties of spruce wood (Picea abies L.). In Materials. ISSN 1996-1944, 2021, vol. 14, no. 17, pp. 1-12.
GOLOVIN, Yuri I. - TYURIN, Alexander I. - GOLOVIN, Dmitry Yu. - SAMODUROV, Alexander A. - MATVEEV, Sergey M. - YUNACK, Maria A. - VASYUKOVA, Inna A. - ZAKHAROVA, Olga V. - RODAEV, Vyacheslav V. - GUSEV, Alexander A. Relationship between thermal diffusivity and mechanical properties of wood. In Materials. ISSN 1996-1944, 2022, vol. 15, no. 2, pp. [1-16].
SZCZEPANSKI, Marcin - MANGURI, Ahmed - SAEED, Najmadeen - CHUCHALA, Daniel. The effect of openings' size and location on selected dynamical properties of typical wood frame walls. In Polymers. ISSN 2073-4360, 2022, vol. 14, no. 3, pp. [1-14].
URSTÖEGER, Johannes - BARBU, Marius Catalin - PACHER, Thomas - PETUTSCHNIGG, Alexander - JORDA, Johannes - TUDOR, Eugenia Mariana. Selected properties of cement bound spruce and larch bark bio-aggregates. In Polymers. ISSN 2073-4360, 2021, vol. 13, no. 24, pp. [1-12].
MAKOVICKA OSVALDOVA, Linda - MITRENGA, Patrik - JANCIK, Juraj - TITKO, Michal - EFHAMISISI, Davood - KOSUTOVA, Katarina. Fire behaviour of treated insulation fibreboards and predictions of its future development based on natural aging simulation. In Frontiers in materials. ISSN 2296-8016, 2022, vol. 9, art. no. 891167, pp. 1-9.
DE TOLDI , Timothée - CRAIG, Salmaan - SUSHAMA, Laxmi. Internal thermal mass for passive cooling and ventilation : adaptive comfort limits, ideal quantities, embodied carbon. In Buildings and cities : alternatives to air conditioning: policies, design, technologies, behaviours [online]. 2022, vol. 3, no. 1, special issue, pp. 42-67 [cit. 2022-07-14]. ISSN 2632-6655. Dostupné na: http://doi.org/10.5334/bc.156
PAL, R. K. - GOYAL, Parveen - SEHGAL, Shankar. Thermal performance of natural insulation materials for energy efficient buildings. In Artificial intelligence, machine learning, and data science technologies : future impact and well-being for society 5.0. Boca Raton : CRC Press, 2021. ISBN 978-0-367-72091-9, pp. 173-192.
DANOVSKA, Maja - PERNIGOTTO, Giovanni - BAGGIO, Paolo - GASPARELLA, Andrea. Simulation uncertainty in heat transfer across timber building components in the Italian climates : the role of thermal conductivity. In Energy and buildings. ISSN 0378-7788, 2022, vol. 268, art. no. 112190, pp. 1-15.
TAIB, Mohamad Nurul Azman Mohammad - ANTOV, Petar - SAVOV, Viktor - FATRIASARI, Widya - MADYARATRI, Elvara Windra - WIRAWAN, Riza - OSVALDOVÁ MAKOVICKÁ, Linda - HUA, Lee Seng - GHANI, Muhammad Aizat Abdul - EDRUS, Syeed Saiful Azry Osman Al - CHEN, Lum Wei - TRACHE, Djalal - HUSSIN, M. Hazwan. Current progress of biopolymer-based flame retardant. In Polymer degradation and stability. ISSN 0141-3910, 2022, vol. 205, art. no. 110153, pp. 1-28.
ZELENIUC, Octavia. Thermal insulation performance of wall structures made of recycled materials. In Pro Ligno. ISSN 1841-4737, 2022, vol. 8, no. 4, pp. 26-35.
HUY, Le Quang - VAN PHU, Tran - VAN KIEN, Pham - HAY, Nguyen. A novel method for determining thermal parameters of moist material. In Physics and mechanics of new materials and their applications : proceedings of the international conference PHENMA 2021-2022. Cham : Springer Nature Switzerland AG, 2023. ISBN 978-3-031-21571-1, pp. 214-231.
LIBRALATO, Michele - DANOVSKA, Maja - PERNIGOTTO, Giovanni - GASPARELLA, Andrea - BAGGIO, Paolo - D’AGARO, Paola - CORTELLA, Giovanni. Effects of different moisture sorption curves on hygrothermal simulations of timber buildings. In Building simulation applications BSA 2022 : 5th IBPSA, Bozen-Bolzano, 29th June-1st July 2022 [online]. 1. vyd. Bolzano : Bozen-Bolzano University Press, 2022, pp. 357-366 [cit. 2023-10-23]. ISBN 978-88-6046-191-9. Dostupné na: https://pro.unibz.it/library/bupress/publications/fulltext/9788860461919.pdf
OLSØ, Brynhild Garberg - HAUKØ, Anne Marit - RISHOLT, Birgit. Experimental study of fire exposed expanded polystyrene (EPS) insulation protected by selected coverings. In Heliyon. ISSN 2405-8440, 2024, vol. 10, no. 4, pp. 1-22.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika nerozpoznaný
Názov Life cycle assessment of timber formwork: case study Aut.údaje Ľuboš Krišťák ... [et al.] Autor Krišťák Ľuboš (35%)
Spoluautori Igaz Rastislav (30%)
Brozman Dušan (5%)
Réh Roman (5%)
Šiagiová Petra (5%)
Stebila Ján 1979- (10%) UMBFP07 - Katedra techniky a technológií
Očkajová Alena 1961- (10%) UMBFP07 - Katedra techniky a technológií
Zdroj.dok. Environmental and safety aspects of renewable materials and energy sources. Pp. 155-161. - Zürich : Trans Tech Publications, 2014 / Ladomerský Juraj 1948- ; Balog Karol ; Martinka Jozef ; Hroncová Emília 1977- ; Dibdiaková Janka Kľúč.slová rezivo životné cykly wood composites formwork life cycles Jazyk dok. angličtina Krajina Švajčiarsko Systematika 62 Kategória publikačnej činnosti AEC Číslo archívnej kópie 30706 Kategória ohlasu DETVAJ, Juraj - JANOVČÍKOVÁ, Petra. Efficient exploitation of beech wood by production of an atypical structural element a hollow wooden post. In Drvna industrija. ISSN 0012-6772, 2017, vol. 68, no. 3, pp. 261-266.
VLČKOVÁ, Mária - GEJDOŠ, Miloš - NĚMEC, Miroslav. Analysis of vibration in wood chipping process. In Akustika. ISSN 1801-9064, 2017, vol. 28, no. 1, pp. 106-110.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ nerozpoznaný
Názov Efektívnosť prestupu tepla pri prirodzenom prúdení v závislosti od povrchovej profilácie teplovýmennej plochy Aut.údaje Rastislav Igaz, Jozef Černecký Autor Igaz Rastislav
Spoluautori Černecký Jozef
Vyd.údaje Zvolen : Technická univerzita vo Zvolene , 2014. - 98 s. : fotogr., gr., sch., tab., 25 cm Vydanie 1. vyd. ISBN 978-80-228-2670-9 Poznámka Bibliografia Kľúč.slová prenos tepla - heat transmission - heat transfer holografická interferometria - holographic interferometry meranie teploty - temperature measurement modelovanie a simulácia - modeling and simulation vedecký výskum - vedecké výskumy - scientific research Form.deskr. monografie - monographies Jazyk dok. slovenčina Krajina Slovenská republika Systematika 536.2 535.8.082.54-023.5 536.5 004.94 Anotácia Resumé anglicky Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xkni - KNIHY Počet ex. 1, z toho voľných 0, prezenčne 1 
kniha
Signatúra Lokácia Dislokácia Umiestnenie Info 379975 Univerzita Mateja Bela FP Katedra techniky a technológií len prezenčne Názov Pracovné prostredie a ergonómia Aut.údaje Alena Očkajová ... [et al.]; rec. Edward Kowal, Anton Osvald, Anna Bencová Autor Očkajová Alena 1961- (30%) UMBFP07 - Katedra techniky a technológií
Spoluautori Stebila Ján 1979- (22%) UMBFP07 - Katedra techniky a technológií
Rajnicová Henrieta 1983- (5%) UMBFP07 - Katedra techniky a technológií
Gajtanska Milada (5%)
Igaz Rastislav (7%)
Krišťák Ľuboš (9%)
Kubovský Ivan (7%)
Pašková Lucia 1979- (5%) UMBFP08 - Katedra chémie
Kvočka Stanislav (5%)
Rybakowski Marek (5%)
Ďalší autori Kowal Edward (Recenzent)
Osvald Anton (Recenzent)
Bencová Anna (Recenzent)
Vyd.údaje Banská Bystrica : Vydavateľstvo Univerzity Mateja Bela - Belianum , 2013. - 402 s. Vydanie 1. vyd. ISBN 978-80-557-0617-7 Kľúč.slová pracovné prostredie - work environment ergonómia - human factors engineering - ergonomics Jazyk dok. slovenčina Krajina Slovenská republika Systematika 331.101.1 349.24 Kategória publikačnej činnosti ACB Číslo archívnej kópie 29434 Kategória ohlasu TUREKOVÁ, Ivana - BAGALOVÁ, Terézia. Posúdenie fyzickej záťaže zamestnancov pri opravách a čistení kovových súčiastok. In Spektrum [online]. 2014, roč. 14, č. 1, s. 32-35 [cit. 2019-03-13]. ISSN 1804-1639. Dostupné na: https://www.fbi.vsb.cz/export/sites/fbi/cs/.content/galerie-souboru/Spektrum/Spektrum_2014_1.pdf
TUREKOVÁ, Ivana - DEPEŠOVÁ, Jana. Evaluation of local physical stress of employees. In QUAESTI : virtual multidisciplinary conference, 15.-19.12.2014 [CD-ROM]. Žilina : EDIS - Publishing institution of the University of Žilina, 2014. ISBN 978-80-554-0959-7, s. 278-281.
HONZÍKOVÁ, Jarmila. Pracovní výchova s didaktikou. Praha : Univerzita Jana Amose Komenského, 2015. [251] s. ISBN 978-80-7452-111-9.
SUCHOŇ, Marek - ZELENÝ, Ján. Hodnotenie rizika expozície zamestnancov vibráciám v pracovnom prostredí. In Acta Universitatis Matthiae Belii: series environmental management. ISSN 1338-4430, 2017, roč. 19, č. 1, s. 42-54.
VLČKOVÁ, Mária - GEJDOŠ, Miloš - NĚMEC, Miroslav. Occupational diseases from noise and vibration in Slovakian forestry. In Akustika. ISSN 1801-9064, 2018, vol. 30, pp. 89-93.
TOMKOVÁ, Viera. Kvalita vnútorného prostredia v školskej učebni a jej vplyv na výkon žiakov. In Technika a vzdelávanie : časopis zameraný na technické vzdelávanie v základných, stredných, i na vysokých školách, na oblasť základného a aplikovaného výskumu, aplikáciu informačných technológií vo výučbe odborných predmetov. ISSN 1338-9742, 2018, roč. 7, č. 2, s. 2-4.
Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ nerozpoznaný
Názov Tvorba nových moderných vysokoškolských učebníc a didaktických prostriedkov pre vybrané prírodovedné a technické predmety v novoakreditovaných študijných programoch Súbež.n. The creation of new modern university textbooks and didactic means for selected subjects from the natural sciences and engineering in a newly accredited study programs Aut.údaje Ivan Kubovský ... [et al.] Autor Kubovský Ivan (25%)
Spoluautori Ďuriš Milan 1954- (15%) UMBFP07 - Katedra techniky a technológií
Krišťák Ľuboš (15%)
Pavlovkin Ján 1955- (15%) UMBFP07 - Katedra techniky a technológií
Gajtanska Milada (15%)
Igaz Rastislav (15%)
Zdroj.dok. Technika a vzdelávanie : časopis zameraný na technické vzdelávanie v základných, stredných i na vysokých školách, na oblasť základného a aplikovaného výskumu, aplikáciu informačných technológií vo výučbe odborných predmetov. Roč. 1, č. 1 (2012), s. 31-33. - Banská Bystrica : Univerzita Mateja Bela, Fakulta prírodných vied, 2012 / Ďuriš Milan 1954- ; Pavelka Jozef ; Pavlovkin Ján 1955- ; Kučerka Martin 1980- Kľúč.slová učebnice - textbooks textbooks multimediálne výučbové programy multimedia tutorials Jazyk dok. slovenčina Krajina Slovenská republika Systematika 004.032.6 Kategória publikačnej činnosti BDF Číslo archívnej kópie 23957 Katal.org. BB301 - Univerzitná knižnica Univerzity Mateja Bela v Banskej Bystrici Báza dát xpca - PUBLIKAČNÁ ČINNOSŤ Odkazy PERIODIKÁ-Súborný záznam periodika nerozpoznaný